Configuration Touchside Utility - Proximus P16-40922 User Manual

Driver Program Installation (For Mac OS)

Configuration Touchside Utility

The touch-sensitive area of the panel and touch–sensitivity both can be modulated through the
configuration utility. Besides, the controller identification and deviceactivated shall be done first.
General
General property page contains the functions of [4 pts Cal], [Draw Test] and [Advanced].
After installing TouchKit, go to the sub-menu [Application]
and double click
[TouchKit Utility] to start the TouchKit diagnosis window.
Please check touch panel devices (included its controller)
are equipped well, then those components will be displayed
the Panel List dialogue box.
There is one or more devices found.
The controller is displayed on the Panel List box. User
can get the information of interface, type, version and model
for each controller.
Select one device after import more than one device at the
panel list window. The one selected will activate the panel.
There are two property pages in TouchKit utility, and they
are General and About.
Each property page contains different functions for users
to do the adjustments.
Therefore, users can easily manage all the TouchKit
controllers through TouchKit Utility.
4 pts Cal
Correct 4 point locations on screen with the panel.
Press [4 pts Cal], screendisplays as follows.
Touch the blinking symbol on panel until beep or stop
blinking.
USB Monitor User Guide
23