Proximus P16-40922 User Manual page 15

Driver Program Installation (For Windows OS)
Configuration Touchside Utility
2. Remove
This function button is used for serial RS232 controllers only. This button will be greyed and
disabled automatically when the selected controller in the controller list window is not RS232 type.
Press to remove and uninstall the selected serial RS232 controller from the system. Then, this
serial RS232 icon object in controller list window disappears automatically.
USB TouchSide device supports plug and play, the icon object for USB controller will be shown
in the controller list window automatically when the USB controller is connected with the system
USB port. And, the icon object for the USB controller will disappear automatically as soon as
the device was removed from the system USB port.
TouchSide utility does not allow user to remove/uninstall the PS2 device driver dynamically.
To uninstall the TouchSide PS2 driver, user needs to go to Windows Device Manager to do
un-installation.
In addition, after PS2 un-installation, it needs to system reboot to complete un-installation.
Monitor Property Page
1. Enable multiple monitor
Check this check box to enable multiple monitor support and uncheck it to disable multiple monitor
support. When this function is disabled, the touchscreen will be mapped to the primary monitor
automatically.
When this function is enabled, user can double click on the monitor area in the monitor geometry
window to assign the monitor area where the touchscreen will be mapped. In other word, the
touchscreen will work with the selected monitor. Then, the selected monitor area rectangle line
will be changed to be white and the other monitor rectangles line will be grey.
16
TouchSide driver utility supports multiple monitor and display
system. To work with multiple monitor system, user needs
to do proper configuration to map the touchscreen working
area to the correct system display area. User can do such
configuration with this property page shown as below,
Display
The system monitor display geometry was shown in the
Monitors window in this page to show the locations of all
of the monitors of the system.
Note
xtouchmon.exe is another utility for TouchSide touchscreen system.
This tray icon utility can monitor the system monitor display
configuration change and correct the touchscreen monitor mapping
relationship automatically as soon as the system monitor display
configuration changed. We strongly suggest the user to make
sure xtouchmon.exe was launched for multiple monitor system.