Table of Contents
Advertisement
2.
To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing
arm plate and into the mounting holes on the monitor.
Figure 2-6
To attach the monitor to other mounting fixtures, follow the instructions included with the
mounting fixture to ensure that the monitor is safely attached.
3.
Reconnect the cables to the monitor panel.
Mounting the MultiSeat Solution to the Monitor
You can attach an HP t150 or HP t200 Zero Client for MultiSeat to the rear of the monitor.
1.
Mount the t150/t200 bracket to the VESA mounting holes on the back of the monitor using the
four mounting screws provided.
Figure 2-7
Mounting the Monitor
Installing the t150/t200 Bracket
Mounting the MultiSeat Solution to the Monitor
7
Advertisement
Table of Contents
