Dynamic Range Control (Drc) Setting - Dab+ Only - Sangean DCR-10 Manual

Dynamic Range Control (DRC) settings
DRC can make quieter sound easier to hear when your radio is
used in a noisy environment. This function is only for the
DAB+ waveband.
1. Press the Standby/Sleep button to switch on your radio.
2. Press and hold the Tuning control so that "Sta.List" appears on
the display.
3. Rotate the Tuning control until the display shows "DRC Val".
4. Press and release the Select button to enter the DRC
adjustment mode.
5. Rotate the Tuning control to select the required DRC setting
(the default is 0).
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Press and release the Select button to confirm the setting.
The display will then return to the previous radio display mode.
Note:
Not all DAB+ broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio
will have no effect.
21
2-3,5
4,6