Installation Procedures
This section describes procedures in mounting the camera on a flat surface.
NOTE:
The camera images on this documentation are for reference only and may be different
from the actual camera.
Step 1: Prepare for Installation
1. Before installing the camera, prepare the additional accessories required for installation.
E9xx Models
Exterior-grade Ethernet Cable with
RJ-45 connector (not included in the
package)
Bundled Cable Gland
2. Depending on the material of the surface where the camera will be installed, it may be
necessary to drill the three (3) screw holes and use the supplied screw tox. In this case,
attach the bundled drill template on the surface and drill the screw holes.
Hardware Manual
Exterior-grade Ethernet Cable with
Waterproof M12 Male Connector
(not included in the package)
12
E9xxM Models