Item
2
Audio Input
3
Ethernet Port
(RJ-45)
4
Reset Button
5
Memory Card Slot
Hardware Manual
Connects to audio input devices, such as a microphone with
built-in amplifier, etc. See
page 23 for more information.
NOTE:
The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
Connects to a network using an Ethernet cable with RJ-45
connector.
Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the Reset Button
for at least 5 seconds or until the Blue LED lights up.
Insert a memory card (not included) into the slot for local
recording purposes. See
Card
on page 21 for more information.
NOTE:
Supports only microSDHC and microSDXC cards.
11
Description
How to Connect Audio In Device
How to Install / Remove the Memory
on