Step-By-Step Instructions For Wall-Mounting The Soundbar - Paradigm soundtrack 2 Setup Manual

EN
PLACEMENT
(cont'd)
Paradigm does not supply screws and anchor bolts
to mount your soundbar to a wall. Although we do
provide limited instructions for wall mounting, you must
contact a Paradigm Dealer for more information. The
subwoofer is NOT designed to be wall mounted.
The instructions that follow assume the mounting
surface is standard wood studs. Should you wish to
mount to another type of surface you must consult
a certified contractor.

Step-by-Step Instructions for Wall-Mounting the Soundbar

What's Included
2 x Wall-Mounting Brackets.
1 x Wall-Mounting Template.
Recommended Tools (not included)
1 x Stud Finder.
1 x Level.
1 x Electric drill and appropriate drill bits.
1 x Phillips Screwdriver.
Recommended Hardware (not included)
4 x Wall anchors to suit mounting surface and weight of soundbar.
4 x Screws to suit mounting surface and weight of soundbar.
IMPORTANT! Weight of soundbar: 7.35 lb / 3.34
EN – 5
NOTE: Mounting instructions are per bracket.
Step 1
Establish desired mounting location.
Step 2
Lightly tape the supplied Installation Template to the wall in the correct
position, using a level for accuracy. Mark locations of the two screws on
the wall. (Fig. 3)
Fig. 3
Fig. 4
Step 3
Using a stud finder, determine if
there is a wall stud directly behind
the chosen location. (Fig. 4)