Using And Adjusting The Safety Harness - Mamas & Papas Dream Swing Instructions Manual

USING AND ADJUSTING THE SAFETY HARNESS

Never place your child in
the seat without fitting and
adjusting the safety harness.
Opening the harness cover
1 1
Pull the front of the harness
cover upwards to access the
buckle.
Fasten the press studs on the
harness cover to close.
Always close the cover when
the child is in the cradle.
Locking the harness
Push the locking catch into
3
3
2
the buckle 1 until it clicks into
place. Repeat the process for
the lock on the other side.
Releasing the harness
Push the two tabs 2 on the
locking catch inwards whilst
pulling the two sections apart
3.
Adjusting the harness length
2
To loosen the harness feed
the webbing back through the
adjustment buckle.
To tighten the harness, pull
the free end of the webbing
outwards.
- 6 -