Table of Contents
Advertisement
KIP C7800 Touchscreen Software
KIP Setup
Selecting the KIP setup button and then rebooting will launch the Setup Wizard
such as a new installation.
Key Code
This is where the key code to unlock purchased options is entered. Selecting the
Key Code Button will bring up the following window
displaying current Options and allowing for the entry of the
Key Code. Please contact your reseller for the purchased
codes for your printer.
Card Reader
Used for "Felica" card reader integration.
Reboot KIP
This button will restart the KIP, when the system is not responding / printing
correctly
Factory Restore
Selecting the Factory Restore button will allow a technician to restore the local
C:\ of the KIP to Factory by using the Restore image stored on the hard drive in a
hidden partition. This will take approximately 45 min.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. 2012 KIP. vii_iv
17
Advertisement
Table of Contents
