Installing The Monitor Driver In Windows Xp - Lenovo ThinkVision L2321x User Manual

Installing the monitor driver in Windows XP

To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD.
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Open the Upgrade Device Driver Wizard window by clicking on Update
11. Insert the Setup CD into the CD driver, then click the Have Disk button.
12. Click on the Browse button and navigate to the following directory:
13. Select the "L2321xwD.inf" file and click the Open button. Click the OK button.
14. Choose L2321xwD and click OK. The files will be copied from the CD to
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve
display quality. Lenovo recommends using either 1920x1080 at a refresh rate of 60
Hz, or 640x480 at a refresh rate of 60Hz.
3-6
L2321x Wide Flat Panel Monitor User's Guide
Downloaded from ManualMonitor.com Manuals
Turn off the computer and all attached devices
Ensure that the monitor is connected correctly.
Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP
Open the Display Properties Window by clicking Start
Panel, and then double-clicking the Display icon.
Click the Setting tab.
Click the Advanced button.
Clink the Monitor tab.
Clink the Properties button.
Clink the Drivers tab.
Driver, and then click Next.
Select Install from a list or Specific location(Advanced), and then click Next.
Select" Do not Search, I will choose the driver to install", click Next.
X:\Monitor Drivers\
(where X is the drive letter designator for the CD-ROM drive).
your hard disk drive.
rate and corresponding Color Matching Profiles.
Settings Control