Selecting A Supported Display Mode; Understanding Power Management - Lenovo ThinkVision L2321x User Manual

Wide flat panel monitor
Hide thumbs Also See for ThinkVision L2321x:
Table of Contents

Advertisement

Selecting a supported display mode

Understanding power management

2-10
L2321x Wide Flat Panel Monitor User's Guide
Downloaded from ManualMonitor.com Manuals
The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may
need to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1920x1080 at 60Hz, which is the Native Resolution Display
mode.
The display modes shown below have been optimized at the factory.
Table 2-3.Factory set display modes
Addressability
PAL
50Hz
640x350
70Hz
640x480
60Hz,66Hz,72Hz,75Hz
640x500
58Hz
720x400
70Hz
800x600
56Hz,60Hz,72Hz,75Hz
1024x768
60Hz,70Hz,75Hz
1152x864
75Hz
1280x1024
60Hz,70Hz,72Hz,75Hz
1360x768
60Hz
1440x900
60Hz, 75Hz
1680x1050
60Hz,75Hz
1920x1080
60Hz
Power management is invoked when the computer recognizes that you do not
use your mouse or keyboard for a user-definable period. There are several states
as described in the table below.
For optimal performance, switch off your monitor at the end of each working day,
or whenever you expect to leave it unused for long periods during the day.
Table2-4.Power indicator
State
Power Indicator
On
Steady green
Standby/
Steady amber
Suspend
Off
Off
Refresh rate
Screen
Restoring Operation
Normal
Blank
Press a key or move the
mouse.
There may be a slight
delay reappears.
Note: Standby also occurs
if there is no image output
to the monitor.
Off
Press power key to switch
on
There may be a slight delay
before the image reappears.
Compliance
ENERGY STAR
ENERGY STAR

Advertisement

Table of Contents
loading

Table of Contents