Using The Thinkvision Duo (Tvd) Software Control; Product Introduction - Lenovo ThinkVision L2321x User Manual

Using the ThinkVision Duo (TVD) software control

1.Product introduction

2.Settings
2-4
L2321x Wide Flat Panel Monitor User's Guide
Downloaded from ManualMonitor.com Manuals
In order to use the dual-screen function of the L2321x monitor, your PC system must
have both VGA and DisplayPort video outputs which must be connected to the monitor
as detailed on page 1-4. Lenovo recommends the use of the ThinkVision Duo software
to optimize the dual screen operation as it simplifies the configuration and display of
both video outputs from your PC.
If the VGA and DisplayPort outputs from a Lenovo ThinkPad are used in dual output
mode then the ThinkPad display will be disabled as the ThinkPad graphics sub system
can only support two display devices simultaneously.
Overview
ThinkVision Duo is designed to work with L2321x dual-screen display, and allows users to
control the use and switch of the dual screen with convenience and efficiency under PC operating
systems.
Startup
Startup
When the user with administrator privilege has properly installed ThinkVision Duo, its icon
will be displayed on the right side of the task bar. Right click the icon to display the software
function menu and use all of its functions.
ThinkVision Duo installation process will recognize the regional language of the system, and keep
consistent with the language specified through Control Panel -> Regional and Language Options.
To switch to other language, select Settings -> Language in the software function menu, then
choose your favourite language.
Auto run with startup
Right click the icon
enable auto run with startup.
Languages supported
English, Chinese, French, Italian, German, Spanish, Japanese, Russian
Overview
Once the software is properly installed, double click the ThinkVision Duo icon on the desktop to
run it, the icon is displayed on the task bar. Left or right click the icon to view the Settings
option.
on the right side of the taskbar, click Settings, and then select Auto-run to