Table of Contents
Advertisement
14.
Select the "Len L151.inf" file and click the Open button. Click the OK button.
15.
Select Lenovo L151 and click Next. The files will be copied from the CD to your
hard disk drive.
16.
Close all open windows and remove the CD.
17.
Restart the system.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1024 x 768 at a refresh rate of 60 Hz, or
640 x 480 at a refresh rate of 60 Hz.
Installing the monitor driver in Windows XP
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP.
4.
Open the Display Properties window by clicking Start Settings Control
Panel, select/enter into the Display control panel.
5.
Click the Settings tab.
6.
Click the Advanced button.
7.
Click the Monitor tab.
8.
Click the Properties button.
9.
Click the Drivers tab.
10.
Open the Hardware Update Wizard window by clicking on the Update Driver, If
appears "Can Windows connect to Windows Update..." window, please select
"No, not this time" option. and then click Next.
11.
Select "Install from a list or Specific location(Advanced)", and then click Next.
12.
Select "Don't search. I will choose the driver to install" option, and then click
Next.
13.
Click the Have Disk button. Click on the Browse button and navigate to the
following directory:
X:\Monitor Drivers\Windows XP & Windows 2000
(where X is the drive letter designator for the CD-ROM drive).
14.
Select the "L151.inf" file and click the Open button. Click on the OK button.
15.
Select Lenovo L151 and click Next. The files will be copied from the CD to your
hard disk drive.
Chapter 3. Reference information
3-5
Advertisement
Table of Contents
