System And Operations Set Up; Setting Up The System; Macro And Punch Through Programming - Home Theater Master MX-1000 Operating Manual

7. System and Operations Set Up

Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds. Move the cursor on
the LCD screen to 2. SYSTEM & OPTIONS with the joystick. Enter
this mode by pushing the joystick down and the following can be
programmed:
A. Setting Up the System.
The LCD screen will list the following choices.
Buzzer Status:
Back Light On Time:
LCD on Time:
Warning of Low Battery: 10% - 50% level
Select the button you wish to change from the list first. Press the UP
or DOWN buttons on the LCD to set them up. Once you set them up,
press the SAVE button to store them.
You will be in the setting mode once again. To return to the main
menu, move the cursor to 8. TO EXIT and press the cursor down or
simply press the MAIN button to exit to main menu.
B. Macro and Punch Through Programming
The MACRO and PUNCH THROUGH can be also programmed in
this mode. Press the button you wish to program and follow
procedures shown below:
Range
High, Low, Off
0 – 120 seconds
5 - 120 seconds
16
Default
High
20 seconds
30 seconds
10 %