Home Theater Master MX-1000 Operating Manual page 11

6. Programming the Remote Control
8. Confirm that you entered the right code number that matches your
component by pressing other buttons such as POWER, VOLUME,
MUTE and CHANNEL. If any of the buttons do not operate as they
should, please repeat from Step 5.
9. Continue to program other components by repeating from the
above step 5.
10. Once you completed programming all the devices, exit from the
programming mode by pressing both the MAIN and PAGE
buttons simultaneously.
11. You will be in the setting mode once again. Move the cursor to
8. TO EXIT and press the cursor down or simply press the MAIN
button to exit to main menu.
2) Auto Scan with brand names.
You can also program your remote control by brand name with the
following steps:
1. Manually turn on the component you plan to operate.
2. Go to program setting mode in the remote control by pressing both
the MAIN and PAGE buttons simultaneously for five seconds.
3. Using the joystick, move the cursor down in the LCD screen to
3. PREPROGRAM.
4. Push the joystick down to enter the preprogram mode.
5. Select the device you wish to program in the LCD screen.
(E.g. To program TV, press the TV device button. )
6. Select the device from which the three digit code number will be
selected from. (E.g. If it is from the TV code table, press the TV device
button.)
10