Canon PowerShot SX10 IS User Manual page 78

761
2
Make settings.
1. Use the .. or .. button to select
[Self-Timer].
2. Use the" or .. button to set.
3. Press the
@
button.
4. Press the MENU button.
3
Press the
~
button.
1. Use the .. or .. button to select the
self-timer mode.
• Pressing the MENU button while this
screen is displayed will display the
[Drive Settings] screen in Step 2.
4
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
*
When [Red-Eye Lamp] is set to [On] in [Flash Control] (p. 110), the lamp will
light
2
seconds before the flash fires.
To Cancel the Self-Timer:
Follow Step 3 to select
Iil.
Changing the Delay Time and Number of Shots
<II>
*1
seiect [Drive Settings].
1. Press the MENU button.
2. In the
L!J
menu, use the" or...
button to select [Drive Settings].
3. Press the
@
button.