Canon PowerShot SX10 IS User Manual page 171

I
Editing Movies
You can delete portions of recorded movies.
• • Movies 1· second or longer before editing can be edited in 1-
. . . second increments, but those that are protected or less than 1
second long cannot be edited.
"'tJ
-
Q )
'<
C-
D)
(")
~
-
m
~
Q)
en
_.
:::s
cc
•
Movie Editing Panel
Select [Edit].
1. In the movie control panel, use the ..
or .. button to select
es.
2. Press the
@
button.
• The movie editing panel and the movie
editing bar will display.
2
Edit the movie.
1. Use the .. or
+
button to select
Ii
(Cut Beginning) or
iii
(Cut End).
2. Use the .. or .. button to specify the
cut point ( , ).
• While moving the cut point using the
.. or .. button, ~ is displayed at
each 1 second interval, allowing you
Movie Editing Bar
to cut the movie at the indicated point.
• Even if you specify the cut point at a position other than
~,
selecting
Ii
will delete the beginning portion of the movie up to
the
!I
point just before your specified cut point, and selecting
f/J
will delete the latter portion of the
mOYie
from the
m
point
just after your specified cut point. The edited movie will be
saved.
• To check a temporarily edited movie, select
CI
(Play) and press
the FUNC./SET button.
• To continue editing, repeat Step 2.
• Selecting
1m
(Exit) cancels the edit and restores the movie
control pa nel.
1