Canon PowerShot SX10 IS User Manual page 150

Saving Original Images
Not only can you save images with altered colors when shooting still
images with the Color Accent or Color Swap modes, but you can
also choose to save the original images (before the color change).
1
Select [Save Original].
1. Press the MENU button.
2. In the
[!J
menu, use the", or
+
button to select [Save Original].
2
Make settings.
1. Use the'" or .. button to select
[On] or [Off].
2. Press the MENU button.
You cannot save theori.ginals of
still
images takenvvhile
shooting a movie in Color AccentorColor
Swap mode.
If [Save Original] is set to [On]
- The transformed image is reviewed in the LCD monitor (or
the
viewfinder) after
shooting in the Color Accent or Color
Swap mode. If you erase the image at this point, the
original image is erased along with the transformed image.
Exercise adequate caution before deleting a file.
- Since two images are recorded with each shot, the number
of shots remaining is approximately half the number
displayed in the LCD monitor (or the viewfinder) when this
function is set to [Off].
- The images are numbered consecutively. The original
images are assigned the lower number and the
transformed color accent or color swap images the next
number.