Sony DAV-TZ100 Operating Instructions Manual page 17

10
Attach the post to the base.
Insert the post so that the slot on the lower part of the post aligns with the projection of the base,
then secure the post with two screws (black).
Projection
Pull the speaker cord in the direction of the
arrow so that it does not get caught when
attaching the post to the base.
Note
• Make sure that the slot on the post aligns with the projection of the base by rotating the post slightly.
Fully-assembled illustration
Front left speaker (L):
White label
White
Post
Slot
Base
Front right speaker (R):
Red label
Red
,
Screws
(black)
Surround left speaker (L):
Blue label
Blue
Surround right speaker (R):
Gray label
Gray
17
GB