6
Insert the post into the hole on the bottom of the speaker so that the screw on the post
faces the front of the speaker.
Screw
Post
7
Adjust the height of the speaker, then secure the post with two screws (with washer).
You can change the height of the speaker depending on the screw positions. Adjust the screw holes
of the post to the holes on the rear of the speaker (A, B, C, or D). The height of the speaker can
be increased by using the holes in order from A to D.
Post
Speaker
Rear of the speaker
A
B
,
C
D
,
Example: Lowest position
Secure two screws (with
washer).
15
GB