Nokia E5-00 User Manual page 190

190 Settings
Advanced WLAN settings
Select Options
>
defined automatically, and changing them is not recommended.
To edit the settings manually, select
define the following:
Long retry limit — Enter the maximum number of transmission attempts if the
device does not receive a receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of transmission attempts if the
device does not receive a clear-to-send signal from the network.
RTS threshold — Select the data packet size at which the WLAN access point device
issues a request to send before sending the packet.
TX power level — Select the power level of your device when sending data.
Radio measurements — Enable or disable the radio measurements.
Power saving — Select whether to use the WLAN power saving mechanism to save
the power in the device battery. Using the power saving mechanism enhances the
battery performance but may weaken WLAN interoperability.
To restore all settings to their original values, select
WLAN security settings
Select Menu Ctrl. panel
>
point, and follow the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one of the access point groups,
and select an access point marked with
To enter the settings for the selected security mode, select
settings.
Advanced settings. The advanced WLAN settings are normally
Settings
>
Automatic configuration
Options
and Connection
.
> Disabledand
Restore
>
Destinations
>
WLAN security
defaults.
Access
>