Rear Panel - FOR-A MBP-100MP64G Operation Manual

2-2. Rear Panel

12 13 14
No. Name
1 GENLOCK
2 OUTPUT 1
3 OUTPUT 2
4 OUTPUT 3
5 OUTPUT 4
6 VGA
LAN1
7
LAN2
USB3
8
USB4
GPI /
9
ALARM
10 RS-232C
11 REMOTE
12 AC IN
Ground
13
Terminal
14 Cooling Fan
15 Audio out
2 3
For external reference signal input (Black Burst signal or Tri-level
sync signal). Either one of two connectors can be used to input the
reference signal. If one connector is used to input a reference
signal, the other is used as a loop through output to pass through
the signal. If the loop through output is not used, terminate the
connector with 75 ohm terminator.
For serial digital component video output (HD/SD SDI, BNC)
All outputs from OUTPUT1 to 4 provide the same video signal.
For output to a VGA monitor. (15-pin mini D-sub)
For connection to a computer Ethernet port.
(100BASE-TX/1000BASE-T, RJ-45) (1000BASE-T
recommended)
For connection to USB devices (USB2.0)
For power / fan alarm output and the GPI input/output. (15-pin
D-sub, female)
For RS232C serial control. (9-pin D-sub ,male)
For RS-422 serial control ( (9-pin D-sub ,female)
For connection to an AC power source via the supplied accessory
cord. (100-240 V AC 50/60 Hz)
For grounding the unit to protect operators against static electricity
and / or electrical shock.
For cooling the unit to prevent overheating. Do not block the vent
with other equipment or objects.
Audio connector for monitoring audio while previewing video.
Compliant to Intel High Definition Audio, 2ch (Realtek ALC262)
3
4 5 9
15
VGA LAN2
1 6 7
Description
11
10
LAN1 USB4 USB3
8