3. Connection
Connect peripheral devices as depicted as follows.
Serial control via REMOTE can only be used for one-way, VTR control or controlled.
MXF files stored on the built-in SSD are converted to HD/SD-SDI signals and output from the
MBP-100MP. The MBP-100MP can also be controlled via VGA from a PC on which the control
software is installed.
MXF
file
MBP-100MP
SSD
GUI operation
IMPORTANT
Unwrapping
REMOTE
OUTPUT 1/2/3/4
MXF
file
VGA
MBP-100MP
Decoding
RS-422 cable
Baseband
signals
VGA cable
7
Baseband signals
(HD/SD-SDI)
VTR controller etc.
HD/SD SDI
signals