Table of Contents
Advertisement
Operating this unit
Part
Operation
Press to start talking on the
l
phone while operating a
phone.
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
LIST/
m
Press to display the list de-
ENTER
pending on the source.
While in the operating menu,
press to control functions.
Display indication
1
3 5
7
9
b
2 4
6
8 a
Indicator
State
! Tuner: band and fre-
quency
! RDS: program serv-
ice name, PTY infor-
mation and other
Main display
1
literal information
section
! Built-in CD, USB stor-
age device and iPod:
elapsed playback
time and text infor-
mation
The list function is being
2
(list)
operated.
Indicator
State
This unit's iPod function
(iPod con-
3
is operated from your
trol)
iPod.
4
LOC
Local seek tuning is on.
5
(TA)
TA function is on.
6
(TP)
A TP station is tuned in.
Track or folder repeat is
7
(repeat)
on.
Random play is on.
(random/
The iPod source is se-
8
shuffle)
lected and the shuffle or
shuffle all function is on.
Shows when the auto-
(auto an-
9
matic answering func-
swer)
tion is on.
Connected to a
(Bluetooth
a
Bluetooth device.
indicator)
The line is on hold.
The sound retriever func-
b
(sound re-
tion is on.
triever)
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2
Turn M.C. to switch to YES. Press M.C. to
select.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
Operating this unit
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3
Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
MW STEP (MW tuning step)
The MW tuning step can be switched between
9 kHz and 10 kHz.
1 Turn M.C. to select the MW tuning step.
9 (9 kHz)—10 (10 kHz)
2 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display to on or off.
2 Press M.C. to confirm the selection.
QUIT appears.
4
To finish your settings, turn M.C. to select
YES. Press to select.
# If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
Notes
! You can set up the menu options in the initial
settings. For details about the settings, refer
to Initial settings on page 11.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Section
02
3
En
Hide quick links:
Advertisement
Table of Contents
