Table of Contents
Advertisement
Additional information
Message
Cause
Action
! Connect a USB
N/A USB
The USB device
connected to is
Mass Storage
not supported
Class compliant
by this unit.
device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB
The USB con-
Check that the
nector or USB
USB connector or
cable has short-
USB cable is not
circuited.
caught in some-
thing or dam-
aged.
The connected
Disconnect the
USB storage de-
USB storage de-
vice consumes
vice and do not
more than
use it. Turn the
500 mA (maxi-
ignition switch to
mum allowable
OFF, then to ACC
current).
or ON and then
connect only
compliant USB
storage devices.
The iPod oper-
Make sure the
ates correctly
connection cable
but does not
for the iPod has
charge.
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
Message
Cause
Action
ERROR-19
Communication
Perform one of
failed.
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23
USB storage de-
USB storage de-
vice was not for-
vice should be for-
matted with
matted with
FAT12, FAT16 or
FAT12, FAT16 or
FAT32.
FAT32.
ERROR-16
The iPod firm-
Update the iPod
ware version is
version.
old.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
STOP
There are no
Select a list that
songs in the
contains songs.
current list.
Additional information
Message
Cause
Action
NOT FOUND
No related
Transfer songs to
songs.
the iPod.
Bluetooth device
Message
Cause
Action
ERROR-10
The power failed
Turn the ignition
for the
switch OFF and
Bluetooth mod-
then to ACC or
ule of this unit.
ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
Handling guidelines
Discs and player
Use only discs that feature either of the following
two logos.
Use 12-cm discs. Do not use 8-cm discs or an
adapter for 8-cm discs.
Use only conventional, fully circular discs. Do not
use shaped discs.
Do not insert anything other than a CD into the
CD loading slot.
Do not use cracked, chipped, warped, or other-
wise damaged discs as they may damage the play-
er.
Unfinalized CD-R/RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals
to the surface of the discs.
To clean a CD, wipe the disc with a soft cloth out-
ward from the center.
Condensation may temporarily impair the player's
performance. Let it rest for about one hour to ad-
just to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions,
and so on.
Road shocks may interrupt disc playback.
Appendix
17
En
Hide quick links:
Advertisement
Table of Contents
