Table of Contents
Advertisement
NETGEAR® DG834G Quick Start Guide
The NETGEAR DG834G ADSL2+ modem from ACN has been set-up to
Plug-and-Play. All that you need to do now is to follow the instructions below.
Please do not use the included CD unless advised otherwise by ACN.
We recommend Windows XP SP2 and later or Mac OS 10.5.4 and above as
minimum Operating System requirements. Ideally, your computer should be
less than five years old and of a reasonable specification to get the most out of
the Internet. It is very important that you ensure that your computer is up to
date with anti-virus and firewall / Internet protection software.
Step 1 - Check Contents
Once you have received your activation email from us to confirm that
your ADSL service has been installed successfully. (You may also have
had a technician come to your home).
Take the modem out of the box and check you have all the cables and
other items below.
Modem, Phone Cable, Splitter, Power Adaptor and Ethernet Cable
Figure 1
PC
Wall Socket
Splitter
Modem
Phone
3
Advertisement
Table of Contents
