ACN NETGEAR DG834G Quick Start Manual page 4

Step 2 - Connect Splitter
Connect the supplied splitter directly to the telephone wall socket.
Step 3 - Connect Modem
Connect the supplied grey telephone cable from the splitter's ADSL
port to the grey ADSL port on the modem.
Step 4 - Connect Your Home Telephone (if you have one)
Connect your telephone to the phone port on the splitter.
Step 5 - Connect PC
Connect the supplied yellow Ethernet cable from the modem's yellow
LAN port to your computer's Ethernet port.
Step 6 - Connect Power
Connect the power adapter to the modem then plug it into an electrical
outlet. Press the black power button at the back of the modem.
Step 7 - Check Installation
1. If the power is connected correctly, the POWER LED will light up.
2. If the grey telephone cable and the splitter are connected correctly,
the DSL LED will flash and after a few seconds turn solid green.
3. Since the modem is pre-configured the INTERNET LED will turn
green after a few seconds.
4. If the yellow Ethernet cable is connected correctly, the
corresponding ETHERNET LED will light up.
5. Once you have confirmed the above, open your web browser (e.g.
Internet Explorer, Google Chrome, Firefox or Safari) and go to your
favourite website.
Congratulations, you are now connected to the Internet.
4