Setting Alarms And Timers; Setting An Alarm; Setting The Sleep Timer - PURE One Flow Manual

Setting alarms and timers

One Flow has two alarms and two types of timers (kitchen and sleep). To set up an
alarm or a timer, press Options and select Alarm or timer.

Setting an alarm

1. From the Alarm or timer menu, turn and press the Select dial to select either
Alarm 1 settings or Alarm 2 settings and press Edit.
2. Turn and press the Select dial to turn the alarm On or Off.
3. Turn the Select dial to adjust the hours and press to confirm. Repeat to set the
minutes.
4. Turn the Select dial to set the days the alarm sounds. Choose between Once
only, Daily, Weekdays, Weekends, Every Saturday and Every Sunday then
press the Select dial to confirm.
5. Turn the Select dial to set the alarm type. Choose between Lounge station, FM
radio or Tone then press the Select dial to confirm.
6. If you've set the alarm type as Lounge station or FM radio, turn the Select dial
to choose between Last used (last station tuned to) or select a favorite Lounge
station or FM preset if you have any saved.
7. Turn the Select dial to change the alarm volume and press to confirm.
8. A set alarm is indicated by
Note: Any alarms that are set will not go off if One Flow is being powered by a
ChargePAK.

Setting the sleep timer

The sleep timer switches your radio into standby after a specified amount of time.
From the Alarm or timer menu, select Sleep timer. Use the Select dial to adjust the
length of the sleep timer in 15 minute steps from 15 mins to 1 hour 30 mins. Press
Save to store.
A set sleep timer is indicated by
in the icon bar.
in the icon bar.
EN
15