Setting Channel Lockout; Deleting Channels - Uniden BC246T Owner's Manual

This setting selects the frequency step used for setting
the channel's. Select your setting, then press E.
Auto - the step is based on the band (see the table at the
front of the manual)
5.0 kHz, 6.25 kHz, 7.5 kHz, 10.0 kHz, 12.5 kHz, 15.0 kHz,
20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0 kHz - The scanner
uses the selected step.
Note: The scanner defaults to Auto.

Setting Channel Lockout

program system
Menu
Select the system
Edit Group
E
Select the group
Edit Channel
E
Select the channel
Set Lockout
E
This setting determines whether the scanner will scan this
channel when its system and group are enabled. Select
your setting, then press E.
Lockout - the channel is not scanned.
Unlocked - the channel is scanned.
Notes:
• The default setting is Unlocked.
• You can also lock or unlock a channel by selecting it
while scanning or holding, then pressing L/O.
See "Basic Operation" on Page 41.

Deleting Channels

program system
Menu
Select the system
Edit Group
E
Select the group
Programming/Editing Optional Settings
E
E
E
E
E
E
E
78