Esata Pci Express Card Installation; System Requirements; Hardware Installation - DataWhale RS-M2TS User Manual

eSATA PCI Express Card Installation

Complete the steps provided in this section to install the eSATA PCI Express Card
for use with the eSATA/USB 2.0 RAID System. The eSATA PCI Express Card
provides a host computer with two Windows and Mac compatible eSATA ports.

System Requirements

• Windows 2000 with Service Pack 4 or later
• Windows XP with Service Pack 2 or later
• Windows 2003 with Service Pack 1 or later
• Mac OS 10.4.x or later
• An available PCI-Express slot
• CD-ROM or DVD-ROM drive

Hardware Installation

1) Power off and unplug your computer.
2) Remove the housing of your computer and locate an available PCI-Express
slot on your motherboard.
3) Insert the card in the available PCI-Express slot. Ensure that the card is firmly
seated in the slot.
4) Replace the housing of your computer.
Mounting
Bracket
System
Frame
Screw
PCI-Express
Card
PCI-Express Slot
28