Table of Contents
Advertisement
Installing/Replacing the Hard Drives in the RAID System
Install an HDD by completing the following steps. After installing the HDD, install
required software if any.
1)
Lift the quick HDD release lever to release the selected HDD tray from the
desired drive bay.
2)
Slide the HDD tray out of the drive bay.
Note: After lifting the lever, the HDD tray will typically be easily released by the drive
bay. Due to the design tolerance of the SATA HDD connector, however, the HDD
tray may not always be released from the drive bay easily, or may not be released at
12
Advertisement
Table of Contents
