Table of Contents
Advertisement
Use only approved parts (multiple slot, battery and memory) and never disassemble the parts.
●
There is a risk of electric shock, fire or damage to the device.
○
Take care when handling the product or components.
●
The device can be damaged or go on fire.
○
Ensure that iQ320 parts or devices do not fall.
●
If you drop a device or component, this can result in injury or damage to the product.
○
Only use parts approved by Manufacturer Electronics and Würth Online World GmbH.
●
Otherwise, there is a risk of fire or damage to the device.
○
If you wish to connect a device that is not manufactured or approved by Manufacturer Electronics and
●
Würth Online World GmbH, consult a Customer Service Centre before connecting the device.
Otherwise, there is a risk of damage to the device.
○
Notes on storage and transport
Observe the specifications for the respective location (e.g. aircraft, hospital, etc.) if you are using a
●
wireless communication device (WLAN, Bluetooth, etc.).
When transporting the device, switch it off and then pull out all connected cables.
●
Otherwise, the product could be damaged or users could trip on the cables.
○
Keep the stylus pen away from children.
●
Children could injure their eyes or try to swallow the pen.
○
Use a iQ320 cleaning solution to clean the device.
●
If you use a cleaning solution or chemicals that have not been developed for iQ320s, this can result in
○
damage to the device.
Do not watch or use the iQ320 when driving a car.
●
This could result in a traffic accident. Concentrate on driving.
○
Avoiding data loss (hard disk management)
Take care to ensure that data on the hard disk is not damaged.
●
A hard disk drive is extremely sensitive to external influences. Bumps and jolts can result in loss of data
○
on the hard disk.
Our company shall not be liable for the loss of user data caused by user carelessness or due to the
○
effect of external influences.
Possible causes of data damage on a hard disk
●
When disassembling and reassembling the iQ320, data can be lost due to an external influence on
○
the hard disk.
Data can be lost if the iQ320 is shut down or reset due to a power cut while the hard disk drive is
○
running.
Data can be lost if the mains current is switched off while a program is being executed.
○
Data on the hard disk can be damaged if the iQ320 is moved, or subjected to external influences,
○
while the hard disk is running.
Back up your data regularly to prevent data loss due to hard disk damage.
●
Operating conditions
Never use the iQ320 in hot or damp areas.
●
Only use the iQ320 within the air temperature and humidity ranges specified in the User Manual.
- 5 -
Advertisement
Table of Contents
