Table of Contents
Advertisement
5.1 Functions of the stylus pen
The stylus pen emulates all of the functions of a standard mouse and can be effortlessly used in place of a
mouse and a standard keyboard. The stylus pen tucks into a designated holder on the lower left side of the
iQ320. Insert the stylus pen back in the holder after use.
Mouse
Stylus pen
Single click
Single tap
Double click
Double tap
Right click
Press and hold
Drag
Drag
IMPORTANT!
Always operate the touchscreen LCD with a stylus pen or with your fingers. Sharp objects can leave
scratches and damage the LCD surface.
5.2 Calibrating the stylus pen
The stylus pen is already calibrated upon delivery. However, if deviations in the pointing position are observed,
the pointing position can be corrected using the
program.
> All programs > eGalaxTouch > Configure
1.
Select Start
Utility >(die Werkzeuge)
2.
On the Tools tab, press the 4-point calibration.
3.
Press on the flashing X with the Stylus pen since this Green
remains. The complied calibration is indicated.
Improving accuracy
If a more exact correction is required, you can correct the pointing
"9-point"
position using the
1.
On the Setting tab under Linearization Style, select the entry
9-point
25-point
"
" or "
"Tools"
2.
On the
number, the more accurate the correction.
X
3.
Press the
symbol shown on the screen and hold it in until it
stops flashing. The
according to the selected number of points.
4.
If the Calibration result window is displayed, click on
then corrected.
Function
Single tap with the pen to select an entry.
Double tap with the pen to execute an element.
Press the pen on an entry and hold it in for 3 seconds to display a
pop-up menu.
Press on an entry and drag it with the pen to move it.
"25-point calibration".
or
" and then press Accept.
Linearization"
tab, press "
X
symbol is displayed repeatedly
eGalaxTouch
. The higher the
OK
. The pointing position of the stylus pen is
- 11 -
Advertisement
Table of Contents
