Epson Runsense SF-710 User Manual page 27

SF-310/510/710 Smartphone User's Guide
Meas.Settings
Setting items
Activity Type
Interval
AT Lap
AT Pause
Target Pace
Waypoint*1
HR*3
Tap*4
(Only for the
measurement screen)
Changing the Settings
Value
Run (default)
Walk
Bike
SETTING 01 to 03
SETTING 01 to 05
OFF (default)
ON
OFF (default)
SETTING 01 to 03
OFF (default)
ON
OFF (default)
ON
OFF (default)
Lap
Light
Screen Chg.
OFF (default)
Explanation
Set when running or jogging.
Set when walking.
Set when performing exercises that do not require you to
swing your arms, such as riding a bike.
Set the contents of high-intensity training (sprint) and
low-intensity training (recovery) and the number of
times they are repeated.
When a time or distance set in advance is reached, this
function records laps automatically.
Set the lap time or distance.
You can set five times or distances within the following
range.
Time: 01'00" to 60'00" (in increments of 1 minute)
Distance: 0.1 to 10.0 km (in increments of 0.1 km)
This function automatically stops measuring when you
stop running, and resumes when you continue running.
Set the target time and pace range for one kilometer/
mile. An alarm sounds if you are outside the set pace
range.
You can set three target paces within the following
range.
Target Pace: 1'00" to 15'00"/km (in increments of 1
second)
Pace Range: 00'05" to 03'00"/km (in increments of 1
second)
You can specify a registered waypoint to display the
direction, distance, and altitude difference*2 to that
point. As you approach the specified point, an alarm
sounds.
You can measure your heart rate by wearing the heart
rate monitor (optional).
You can perform one of the functions specified in this
item by tapping the screen while measuring.
When Bike is selected as the Activity Type, the tap
function may operate automatically depending on the
condition of the road surface. If this occurs, we
recommend to change the setting to OFF.
27