Attaching The Flexstand - Eizo FlexScan EV2023W User Manual

- Attaching the FlexStand
The once removed the FlexStand can be attached to the monitor again with the
following procedures.
1
Put the insertion part of the stand in the slot of the monitor.
At the time, use as a guide that the marks (1) on the stand match to the
screw holes (2) of the monitor.
2
Attach the stand moving the monitor toward the stand.
Make sure that the lock is latched with clicking sound shown in the figure
below.
Downloaded from ManualMonitor.com Manuals
Screw holes
Marks
Incorrect Correct
7
Chapter 5 Reference