Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips DC320 User Manual

5 Listen to radio

Note
Only FM radio reception is available on this
unit.

Tune to a radio station

Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
Note
For optimal reception, fully extend and adjust
the position of the antenna.
1
Press TUNER to select FM tuner.
2
Press and hold
control for more than 2 seconds.
»
[SRCH] (search) is displayed.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
reception.
/ on the remote
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
»
[AUTO] (auto) is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
»
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press SET TIME/PROG to activate the
program mode.
3
Press PRESET +/- to select a number.
4
Press SET TIME/PROG
5
Repeat the above steps to program other
stations.
/
Tip
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
Press PRESET +/- to select a preset
number.
EN 13