Honda CBR600RR Owner's Manual page 95

Tyre Puncture u
3. Adjust the drive chain.
4. Install and tighten the rear axle nut.
Torque: 113 N·m (11.5 kgf·m, 83 lbf·ft).
5. After installing the wheel, apply the brake
pedal several times, then recheck the disc
for caliper holder to disc clearance. Do not
operate the motorcycle without adequate
clearance.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
92
Removing Wheels
P. 66
2