Honda CBR600RR Owner's Manual page 88

(ABS type only)
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙
Front Wheel
Removal
1. Park on a firm, level surface.
2. Cover both sides of the front wheel and
brake caliper with protective tape or
cloth.
Mounting Brake
bolts caliper
Bolts (ABS type only)
Wheel speed sensor
(ABS type only)
Tyre Puncture
3. (ABS type only)
Remove the wheel speed sensor by
removing the bolts.
4. On the right side, remove the mounting
bolts and remove the brake caliper.
5. On the left side, remove the mounting
bolts and remove the brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not pull the brake lever or push the
brake pedal while the brake caliper is
removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.
u Removing Wheels
continued 85