Honda CBR600RR Owner's Manual page 90

Installation
1. Attach the side collars to the wheel.
2. On the left side, place the wheel
between the fork legs and insert the
lightly greased front axle shaft to the
end, through the left fork leg and wheel
hub.
3. Align the end of the front axle shaft with
the surface of the fork leg.
4. Tighten the left axle pinch bolts to hold
5. Tighten the axle bolt.
6. Loosen the left axle pinch bolts.
7. Tighten the right axle pinch bolts.
8. Install the right brake caliper and tighten
Surface of
fork leg
End of front
axle shaft
Tyre Puncture
the axle.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft).
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
the mounting bolts.
Torque: 45 N·m (4.6 kgf·m, 33 lbf·ft).
u Removing Wheels
continued 87