Honda CBR600RR Owner's Manual page 94

6. Remove the brake caliper bracket and rear
wheel, side collars.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc to pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
1. To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Tyre Puncture
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
2. Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
Swing arm
u Removing Wheels
Lug Brake caliper
bracket
Slot
continued 91