Table of Contents
Advertisement
Transferring routes, marks and tracks from the Adventurer 3000 to your PC
To save your routes, marks and tracks for viewing in Memory-Map on your PC please follow the steps below:
1.
On the ADV3000 tap Extended Menu (
the menu. Tap the Kbd button to display the keyboard, give the file a name and then tap OK to save.
2.
Exit Memory-Map on the ADV3000 by tapping Exit (
USB cable. Tap the Press to Connect button on the Adventurer 3000 screen and it will connect to the PC as a
removable drive.
3.
In Memory-Map on your PC click Overlay > Import... In the Open window that appears select GPS eXchange files (*.gpx)
from the drop down file type box and then navigate to the Adventurer removable drive in My/This Computer. It can
be easily identified as it will contain a number of Memory-Map folders and a Userdata folder.
4.
Double-click on the Userdata folder and then open the file you named and saved on your Adventurer 3000. The route,
mark or track will now be displayed on your PC.
Sending maps to the Adventurer 3000
Both existing Memory-Map complete maps and Memory-Map Digital Map Shop maps can be sent to the Adventurer 3000 and
stored on the MicroSD card.
To open maps on the GPS tap Extended Menu (
A list of maps will appear. If you have recently sent a map from your PC tap the Refresh button to update the map list. To
open a map tap once on the name and the map will be displayed.
Sending complete (disc/USB based) maps
If you have purchased a complete map (such as OS 1:50k Great Britain, OS 1:25k Great Britain, OS 1:10k Streetview, CAA charts,
Marine charts or A-Z) then you will need to follow the instructions below to send and activate it on your Adventurer 3000:
1.
Exit the Memory-Map application on the ADV3000 if it is running by tapping Exit (
Menu (
) first) and then connect your Adventurer 3000 to your PC with the supplied USB cable. Tap the Press to
Connect button on the Adventurer 3000 screen and it will connect to the PC as a removable drive.
2.
On your PC, Navigate to the C:\Maps_v5 folder (this is the default folder where Memory-Map stores map files).
3.
If you have numerous Memory-Map products then there will be several folders, select the folder that is relevant to
the mapping you want to send to the unit (i.e. the folder named os50 will contain Ordnance Survey 1:50k Landranger
mapping – the 2015 complete maps can be found under DMS/GB/OS2015).
4.
In the folder you've selected there should be a .qct (will have the Memory-Map icon) and a .qc3 file (not all map files
have .qc3 file):
Copy and Paste these files into the Maps folder on the ADV3000 removable drive (the amount of time it takes to
transfer depends on the size of the mapping).
ADV3000 User Guide v1.3
) followed by Settings & Overlays (
). Connect your Adventurer 3000 to your PC with the supplied
), followed by Settings & Overlays (
) and then tap Overlay > Save As... from
) and then tap Map...
) (you may need to tap Extended
Page 12 of 16
Advertisement
Table of Contents
Need help?
Do you have a question about the Adventurer 3000 and is the answer not in the manual?
Questions and answers