Selecting A Supported Display Mode - Lenovo ThinkVision L193p User Manual

OSD Icon on
Main Menu
Options
Exit

Selecting a supported display mode

Downloaded from ManualMonitor.com Manuals
Table 2-2. OSD functions (continued)
Submenu Description
Adjusts menu location on the screen.
Menu Position
Default Returns the menu position to the default settings.
Custom · Horizontal: Changes the horizontal position of the OSD.
·
Vertical: Changes the vertical position of the OSD.
·
Save
·
Cancel
·
Factory Default Reset
Resets monitor to the original factory settings.
Change button repeat rate and menu time-out settings.
Accessibility
Select
·
Off
·
Default
·
Slow
remain active after the last time a button is pressed.
Exit the main menu
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need
to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1280 x 1024 at 60 Hz, which is the Native Resolution
Display mode.
Button repeat rate:
or
to change.
Menu time out: Sets the length of time the OSD will
Chapter 2. Adjusting and using your monitor
Controls and Controls and
Adjustments Adjustments
(Analog) (Digital)
Same as Analog
Same as Analog
2-6