Software Setup; C-Monitor/C-Setup; C-Navigator - C-Nav 2050M User Manual

C-Nav2050 User Guide

Software Setup

C-Monitor/C-Setup

After installation, double-click on the C-Monitor or C-
Setup icon. Use the menu to select:
File Open Port
Choose communication settings:
19200 baud, parity none, 8 data bits, 1 stop bit
Press "Ok"
This software will allow you to view the positioning data
in real-time and control the C-Nav2050. For further
information, see the C-Monitor and C-Setup Users
Manuals:
www.cnavgps.com/support

C-NaviGator

After connecting the DB9 end of the serial cable to the
C-NaviGator, use the touch-screen menu to select:
Settings Port, and choose the corresponding port.
Select the receiver type and choose communication
settings:
19200 baud, parity none, 8 data bits, 1 stop bit
Press "Ok"
This software will allow you to view the positioning data
in real-time and control the C-Nav2050. For further
information, see the C-NaviGator Users Manual:
www.cnavgps.com/support
iii