Sharp MX-M283N Installation Manual page 37

C. Punch position label attachment
1) Attach the label to the position indicated in the figure.
[For scanner] (Part No. 13 in the package of the MX-FNX9)
Lose the
clearance.
Second label
First label
Corner R end fitting
Label attachment
Corner R end fitting
reference
Corner of the "upper
cabinet rear"
[For DSPF/RSPF] (Part No. 14 in the package of the MX-
FNX9)
DSPF
1mm
1mm
RSPF
1mm
1mm
D. Turn on the power of the main unit
1) Insert the power plug of the main unit into the power outlet.
2) Open the front cabinet.
Turn ON the power switch in the front cabinet of the main unit.
3) Turn ON the power switch on the operation panel.
MX-M503N MX-PNX1 5 – 4
ON