PDQ Yachts 36 Capella Owner's Manual page 40

Annually:
• Check steering fasteners. (Section 7-5)
• Check rudder alignment.
Ensure that rudders are operating smoothly.
• Check Diesel mounting bolts and shaft alignment.
• Check and lubricate turnbuckles. Replace any defective or corroded parts.
Renew all tape over cotter pins.
• Check electrical wiring for loose connections and corrosion. Check all fuses
and their terminals for corrosion and signs of heat damage. (Section 7-6)
• Clean seacocks. After cleaning all seacocks, open and close them ten times
to prove smooth operation.
• Check the condition of corrosion-protection zinc anodes on underwater
parts, of the auxiliaries.
PDQ 36 Capella - Owner's Manual
Suggested Schedules 7-2
Make sure rudders are correctly positioned.
(Continued)