• Switch on "ship's" (engine starting) batteries (switch locations below the steps in
each hull),
• Start engines, in the Classic, lower the outboard motors,
• Lower sail in a clear patch of water,
• Remove dock lines, fenders and boat hook from lockers and place as required,
• Return to dock or mooring and secure,
• Shut down engines, in the Classic, raise the outboard motors,
• Close valves on propane tank if the boat will be left for a prolonged period.
•
Connect shore power and set required battery charging condition (section 4-1 and 4-3)
• Closing seacocks when the boat is to be left for any length of time is recommended
• Switch off 12-volt power within the boat at the electrical panel.
• If you keep the boat on salt water, hose it down to remove the salt,
PDQ 36 Capella - Owner's Manual
Returning to Harbour Checklist 6-2