Parrot CK3000 User Manual page 8

ENGLISH

PAIRING WITH ERICSSON R520M ,T39/T39M,T68/T68M

AND SONY ERICSSON T68I

You need to pair devices when powering up the CK3000 for the first time or after resetting your hands-free. Subsequently,

all connections between your phone and the car kit are automatically established when both devices are within a few

meters range of each other. A 'beep' is heard when the connection is established.

Procedure :

IMPORTANT: for Ericsson T39/T39m, R520m, T68/T68m and SonyEricsson T68i, the infrared (IrDA) sensor has to be

disabled for CK3000 to operate. Comply with the following recommendations: Go into the Menu, go to "Extras" or

"Connect";

until " Infrared port", press "Yes", then

After turning on the ignition of your car, carry out the following sequence for Ericsson R520m, T68/T68m and T39/T39m

telephones.

• For the T68/T68m and T68i, go to "Connect", then "Bluetooth", then follow the instructions below.

• For the R520 and the T39/T39m, press

Press

until "Paired devices", press Yes.

Press "Add device", and "Yes ". Select "Phone initiates", press "Yes" then press

press "Yes", then "Prepare headset" is displayed.

"Searching" is displayed.

When "Parrot CK v..." is displayed, click on "Yes".

"Add to Parrot devices" - press "Yes".

"Connection key" or "Enter Password" is displayed, enter 1234, then press "Yes".

The connection phase is now complete and "Pairing succeeded" is displayed on your screen.

Then press "Yes" to validate the name of your new paired device.

For phones with "Handsfree" profile, the initial synchronization is manual (see "Phone configuration" page 12). Please, go to

the phone Menu

"Connect"

phonebook will synchronize with CK3000.

until "Extras", then

"Accessories". Press "Yes" and "Parrot Menu" is displayed. Press "Yes" and your

ERICSSON & SONY ERICSSON

until "Disabled" and confirm by pressing "Yes".

until "Bluetooth" and press "Yes".

and select "Headsets" or "Handsfree",