Parrot CK3000 User Manual page 5

ENGLISH
PAIRING WITH NOKIA 3650, 3600, N-GAGE, 6600 AND SIEMENS SX1
You need to pair devices when powering up the CK3000 for the first time or after resetting your hands-free. Subsequently,
all connections between your phone and the car kit are automatically established when both devices are within a few
meters range of each other. A 'beep' is heard when the connection is established.
Procedure :
Check that the red and green lights of the buttons come on and off according to the position of the ignition key. You should
hear the « Please pair device » instruction for the first time. If not, reset your CK3000 by pressing the green and the red
buttons at the same time.
•
From your phone, display the main menu, select :
the CONNECTIVITY icon, then the BLUETOOTH icon for Nokia 3650, 3600, 6600 and Siemens SX1
the TOOLS icon, then the BLUETOOTH icon for Nokia N-GAGE
•
Check that BLUETOOTH is ON, select the PAIRED DEVICES tab by pressing the right arrow, press OPTIONS.
•
Select NEW PAIRED DEVICE (searching).
•
Press STOP, Select Parrot CK V... (waiting).
•
Enter 1234 as PASSCODE, press OK.
After the 'beep', accept the connection request by pressing YES.
USING PHONE-SPECIFIC FEATURES
Redialing:
•
Press and hold the PICK UP (green) button on the keypad unit for 2 seconds to redial the last number called.
Dual call:
•
Upon hearing a 'beep' during a call, press the PICK UP (green) button on the keypad. The active call is placed
on hold while the waiting call is accepted.
•
Press the PICK UP button again to switch between the two calls.
•
Press the HANG UP button on to reject the waiting call.
Private mode:
•
During the call, press the PICK UP button on the CK3000 to toggle between hands-free and private mode.
Private mode routes the call to the phone.
Auto Answer:
•
From your phone, display the main menu, select the TOOLS icon.
•
Select SETTINGS, and then select :
ACCCESSORY icon for Nokia 3650, 3600, 6600 and Siemens SX1
ENHANCEMENT icon for Nokia N-GAGE
•
Select HANDSFREE, AUTOMATIC ANSWER, select OPTIONS, select CHANGE, select ON, press OK.
TRAINING NAMES
Your phone lets you assign voice tags to any phonebook entry. With the CK3000, you can use those tags to call your
contacts, press the PICK UP button and say the name after hearing the 'beep'.
Training Names
•
From your phone, display the main menu, select the CONTACTS icon.
•
From the phonebook list, select the name you wish to train, press OPTIONS.
•
Select OPEN, press SELECT.
•
Select the phone number you wish to train, and then select OPTIONS, select ADD VOICE TAG, press SELECT.
•
Press START and say the name displayed.
Refer to your phone manual for details on how to edit the voice tags.
After getting into your car and turning of the ignition key, your telephone
may ask you whether you wish to establish the Bluetooth connection with
CK3000. If you want to, you can disable this function :
In the BLUETOOTH menu, go in the PAIRED DEVICES tab by pressing the
right arrow
Select « Parrot CK v... » and then OPTIONS
Then, select SET AS AUTHORISED
NOTE: Make sure the Bluetooth option is turned ON.
NOKIA/SIEMENS
5