Getting Started - Philips 19S1 User Manual

Your LCD Monitor :
• Front View Product Description
• Setting Up and Connecting Your
Monitor

• Getting Started

• Optimizing Performance
Downloaded from ManualMonitor.com Manuals
Getting Started
Getting Started
Use the information file ( .inf) for Windows® 2000/XP/Vista or later
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 2000/XP/
Vista. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the
'Monitor' dialog box in Windows® 2000/XP/Vista and the Plug & Play application can be activated. The installation
procedure based on Windows® 2000 , XP and Vista is specified as follows.
For Windows® 2000
Start Windows® 2000
1 .
2 .
Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3 .
Double click on the 'Display' Icon.
4 .
Select the 'Settings' tab then click on 'Advanced...'.
5 .
Select 'Monitor'
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.
6 .
Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
7 .
Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on
'Next' and then click on 'Have disk...'.
8 .
Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).
9 .
Click on the 'Open' button, then click on the 'OK' button.
1 0 .
Select your monitor model and click on the 'Next' button.
1 1 .
Click on the 'Finish' button then the 'Close' button.
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.
For Windows® XP
Start Windows® XP
1 .
2 .
Click on the 'Start' button and then click on 'Control Panel'.
3 .
Select and click on the category 'Printers and Other Hardware'
4 .
Click on the 'Display' Item.
5 .
Select the 'Settings' tab then click on the 'Advanced' button.
6 .
Select 'Monitor' tab
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active, click on 'Properties' button.
Please follow the steps below.
7 .
Click on the 'Driver' tab and then click on 'Update Driver...' button.
8 .
Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.