Projecting Portrait Images
The projector can be used on its left side (when viewed from the front) to project portrait images.
Caution on placing in portrait orientation
•
When using the projector on its left side, do not block the intake vents. Doing so will cause build-up heat inside
the projector.
•
When using the projector on its left side, attach a stand supporting the projector.
•
Lock the lens shift after completing lens shift adjustment.
Specifications of stand for projecting portrait images
For designing a stand for projecting portrait images, consult your dealer.
1. Allow 310 x 170 mm of space for the intake vents.
2. Allow 130 mm or longer for opening the filter cover (intake vent).
3. Use the 4 screws on the bottom of the projector.
Location of 4 screws: 200 x 250 mm
Screw: M4 x 8 mm
•
Design the stand so that it will not contact the rear feet of the projector.
•
Design the stand in such a way that it will not fall down easily.
6. Installation and Connections
155